Spirafix^TM Anchor Item Code Diameter Length Thickness SF30-5-440A 30mm 440mm 5mm Head Size Thread 19mm AF M10-1.5 Load Rating* 170kgs to 340kgs Spirafix^TM Anchor Item Code Diameter Length Thickness SF30-5-360A 30mm 360mm 5mm Head Size Thread Size 19mm AF M10-1.5 Load Rating* 120kgs to 240kgs Price - £5.93 each inc. VAT Price - £6.41 each inc. VAT Products > Spirafix^TM 30mm > “A” Type Ground Anchors & Fittings SA339 - 90° Bracket for 30mm Diameter Spirafix^TM anchors Price - £1.14 each inc. VAT ©Spirafix Limited 2010 - All Rights Reserved - Updated 10/04/2011 Made with Xara Web Designer 6 Installation Method - Screw into soft ground using 19mm socket and downward pressure or drive in with 1kg hammer for harder ground. Installation Method - Screw into soft ground using 19mm socket and downward pressure or drive in with 1kg hammer for harder ground. * The Load Ratings are indicative only (see Load Chart for more detail). Actual loads can vary outside these values. Please ensure that the location where these anchors are to be used is free from buried services. £6.00 flat rate UK Mainland delivery for all orders under £50.00, orders £50.00 and over free UK Mainland delivery. Please call us for discounts on order values above £100.00. For all offshore deliveries please call 08455 441451 or email sales@spirafix.com Two working day delivery time for items in stock, two weeks for items out of stock, subject to demand.  All prices include VAT at 20% These Spirafix^TM anchors require an M10 x 15mm set screw to fix the bracket below to the anchor (See “Products >Ancillary Items > Set Screws, Nuts & Washers”). If they are to be bolted to other items, then please note that the thread depth in these anchors is 15mm and any set screw or bolt used must not bottom out in the head, but must pull the anchor up tight to the item being anchored.  For kits of four anchors complete with brackets and all screws required please see Products > Useful Kits.