sales@spirafix.com +44 0345 29 62 792

Temporary anchors with easy installation and 100% removal

Client: Lyndon Scaffolding PLC

To secure overhead line works for National Grid so that 100% of the anchor could be efficiently removed, leaving no trace on granters land once work was completed. To prove load ratings were sufficient. To provide evidence of testing procedures and installation demonstrations.

Challenges

Lyndon did not want heavy plant and equipment to install their anchors and needed to be able to effectively 'lock off' each anchor

Solution

Using the SF75-12-1100AC helical anchor we were able to prove load results as required. Hand held petrol post drivers were advised plus the purchase of the Spirafix Locking Bar and Pin.
The Spirafix Ground Anchor range is easy to install - driving down into position on its own helix, it's also easy to remove using the Spirafix Removal Tool. The locking bar and pin are straightforward to use and also easy to remove. Upon completion of the job the anchor can be 100% removed leaving virtually no trace.